Color Quartz System

The Cuarzocolor system is an application method derived from the multilayer system, used to generate aesthetically very colourful and mechanically resilient flooring, with remarkable savings in binder. Transparent binders are used with 100% solids, applied by rubber trowel, then dusted with fine quartz aggregate (0.6 mm) between layers and with coloured aggregate on the final layer(s). This type of flooring is especially suitable for application in areas where high mechanical and chemical resistance is required, with enhanced anti-slip properties and a decorative finish. System thickness varies according to the number of layers (recommended minimum of 3 mm).

Primer:

SEIREPOX TOP PLUS: transparent epoxy binder with 100% solids for primer, intermediate layer, and sealant layers. High chemical and mechanical resistance.

Intermediate and finishing layer:

SEIREPOX TOP PLUS: transparent epoxy binder with 100% solids for primer, intermediate layer, and sealant layers. High chemical and mechanical resistance.

OLYMPUS DIGITAL CAMERA
esquema_quartzcolor

Description

Layer

Material

Consumption
Resin Mortar with 1:4 resin-aggregate ratio
Coloured aggregate

1

SEIREPOX TOP PLUS : QUARTZ SAND
Mixing ratio 1:0.5
500-600 gr/m2

2

Dust to saturation with 0.6 mm quartz aggregate3 -3,5 Kg/m2

3

SEIREPOX TOP PLUS : 0.4 mm QUARTZ SAND
Mixing ratio 1:0.5
500-600 gr/m2

4

Dust to saturation with coloured aggregate4 Kg/m2

5

SEIREPOX TOP PLUS300-350 gr/m2

Other Epoxy Flooring Systems

  • Paint System
  • Autonivelante Sistemas Pavimentos Epoxídicos
    Self-levelling System
  • Multi-layer System
  • Dry Mortar System
  • Conductive Self-Levelling System
  • Non-toxic Paint System
  • Colour Quartz System
  • Terrazo System
  • Rapid Dry Mortar System
  • Rapid Multi-Layer System