Dry Mortar System

The dry mortar system is a high-strength and high-thickness (5-8 mm) system which is accomplished by mixing an epoxy binder with a 0.8 mm silica aggregate at a 1:6 – 1:8 ratio. Rake applied wet on wet on the primer and a smoothing beam, which, supported by two guides, will achieve the desired thickness (always a minimum of 4 mm). It is then compacted and smoothed with a mechanical smoothing trowel for epoxy or with a metal trowel. To make this operation easier, the trowel should be cleaned at intervals with solvent. The system is completed with a sealing layer.

Its rough finish provides anti-slip properties and it is typically used in areas subject to high mechanical stress.

Dry Mortar Colorless

Primer and intermediate layer

SEIREPOX TOP PLUS: 100% solids, transparent epoxy binder valid for priming, intermediate layer, and seals. High chemical and mechanical resistance.

Sealed

SEIREPOX TOP PLUS: 100% solids, transparent epoxy binder valid for priming, intermediate layer, and seals. High chemical and mechanical resistance.

SEIREPOX SF250: Two component, solvent free, 100% solids epoxy paint. Coloured, glossy, for smooth or anti-slip finishes giving the coated surfaces waterproofing, ease of cleaning and high abrasion, mechanical and chemical resistance, as well as providing for easy maintenance.

sistema-mseco2
esquema_Morteroseco

Description

Layer

Material

Consumption
Resin mortar with resin-aggregate
ratio of 1:6-1:8
0.8 mm
silica aggregate

1

SEIREPOX TOP PLUS

200-300 gr/m2

2

SEIREPOX TOP PLUS: QUARTZ AGGREGATE 0,8 mm

2,9 Kg/m2/mm (mix)

3

SEIREPOX TOP PLUS/SEIREPOX SF2501
(with tixotropant)

500-600 gr/m2
(with 1 layer tixotropant)

1) SEIREPOX SF250 can be used where a colour finish is desired.

sistema-mseco2
esquema_Morteroseco

Dry Mortar Colored

Primer

Be selected from the range of primers Seire, suited to the needs of the work primer.

Intermediate layer

The mortar should be applied to the primer while still wet.

SEIREPOX TERRAZO: Coloured epoxy binder especially developed to prepare mortars with crushed glass or marble, to make continuous terrazzos.

Finish

SEIREPOX TERRAZO: Coloured epoxy binder especially developed to prepare mortars with crushed glass or marble, to make continuous terrazzos.

Description

Layer

Material

Consumption
Resin mortar with resin-aggregate
ratio of 1:6-1:8
0.8 mm
silica aggregate

1

SEIREPOX IMPRIMACIÓN1

200-300 gr/m2

2

SEIREPOX TERRAZO: QUARTZ AGGREGATE 0,8 mm

2 kg/m2/mm (mix)

3

SEIREPOX TERRAZO

500-600 gr/m2

Other Epoxy Flooring Systems

  • Paint System
  • Autonivelante Sistemas Pavimentos Epoxídicos
    Self-levelling System
  • Multi-layer System
  • Dry Mortar System
  • Conductive Self-Levelling System
  • Non-toxic Paint System
  • Colour Quartz System
  • Terrazo System
  • Rapid Dry Mortar System
  • Rapid Multi-Layer System